Walk Behind Tractors

  • Adjustable Ridger Small

    Built by Aldo Biagioli. Fully adjustable. Attaches to the tractor in place of the tiller. Wheel weights are recommended for extra traction. Attack angle is adjustable, unlike the other two styles, and this one can also be offset slightly (up to 4_) to...

    Add to Cart
  • AP-5 Root Digger Plow

    Built by Aldo Biagioli. Good for small-scale root crop harvesting. It requires wheel weights to be effective, as with any tool on a walk-behind tractor which requires tractive (rather than PTO) power. Easily digs as deep as the soil has been worked...

    Add to Cart
  • BCS Rear Tine Tiller 30 in

    With BCS Tillers, you don't just dig your dirt, you build your soil. Bust sod, prepare seedbeds, precision cultivate and, when gardening season is over, power compost spent plant material or between-season cover crops directly back into your soil for...

    Add to Cart
  • BCS Snow Thrower 28"

    With an impeller speed of more than 1200 RPMs, the BCS Snow Thrower is misnamed—it should be called the snow cannon! Snow shoots from the stainless steel discharge chute up to 40 feet, throwing dry, wet, and icy snow with ease without snow...

  • Double Ridger Bed Shaper

    Two adjustable ridgers clamped to a 45" wide tool bar. Two furrows are created, and a drag chain levels off the top of the bed between the two furrows. Makes anywhere up to a 30" wide raised bed, it will raise the bed 2"- 3". Narrower...

    Add to Cart
  • ET 3 tine cultivator with hitch

    Fixed frame 21_ wide. Fits 5 hp and up. Weighs 75 lbs. Constructed by Aldo Biagioli of Italy. Clamps and shanks can be added, removed and slid left, right, up and down on the frame. come with 2 removable/adjustable caster wheels for depth control. Frame...

    Add to Cart
  • Grillo

    Grillo Brush Mower attachment

    Just like a miniature bush-hog!  1/4" thick hinged steel blades easily chop weeds, brush, and saplings up to 1" thick.  3/16" plate steel deck with reinforced rubber flaps for material discharge.  Floating deck runs on 2...

    Add to Cart
  • Grillo

    Grillo Rear Tine Tiller

    The Grillo 27" tiller has hardened steel ring and pinion drive ball bearings; 290 rpm tine speed w/bolostyle tines.  It can leave up to 8" depth worked soil, so it is best used as a secondary tillage tool or to incorporate soil amendments. The...

    Add to Cart
  • Moldboard plow

    Built by Aldo Biagioli. Uses the drawbar and angle-adjustment assembly to attach to the walk-behind tractor PTO flange. Switches easily to other implements with a single pin. ALL MOLDBOARD PLOWS REQUIRE AT LEAST 150 LBS OF WHEEL WEIGHTS (and may require...

    $260.00 $174.00
    Choose Options